ETICS accessories

Product Search

Mastering connection problems safely

Mastering connection problems safely The demands on the quality and flexibility of plastering profiles in ETICS are constantly increasing. Thicker insulation materials, larger, floor-to-ceiling window and door elements, their installation in line with walls or façades and the trend towards darker colours on façades require more customised solutions for different movement absorption and crack-free façade connections.

Window reveal beads from Baukom create a flexible, permanent seal, prevent moisture from entering, protect against damage, and guarantee a finished façade that is aesthetically pleasing. But a clean transition between exterior cladding and adjoining architectural elements like windows and doors can only be created by using the right window reveal bead. You will find the matching solution for your challenge right here.

Article

Dimensions

Joint width

Panzer roll corner bead 0015

0015 Panzerroll corner with special, colour-coded kinked edge for reinforcing inner and outer edges in ETIC systems. Particularly suitable for additional reinforcement of internal edges if fire barriers are required as a fire protection measure in ETIC systems with EPS.

Width: 24 cm (11x13 cm)

PVC-Roll corner angle 0016

0016 PVC mesh corner bead used to create edge reinforcement in ETIC systems. Thanks to the flexibility of the profile, edges with angles between approx. 60° and 150° can also be created.

Breite 20 cm (10 x 10 cm)

50 m / 25 m per box

Joint sealing tape 0310/1-4

0310/1-4 Pre-compressed Joint sealing tape to DIN 18542 BG1 made from flexible polyurethane foam for sealing joints and connections in ETIC systems.

13 m Roll

1 - 4 mm

30 rolls/box

Joint sealing tape 0310/2-6

0310/2-6 Pre-compressed Joint sealing tape to DIN 18542 BG1 made from flexible polyurethane foam for sealing joints and connections in ETIC systems.

12 m Roll

2 - 6 mm

30 rolls/box

Joint sealing tape 0315/2-6

0315/2-6 Pre-compressed Joint sealing tape to DIN 18542 BG1 made from flexible polyurethane foam for sealing joints and connections in ETIC systems.

12 m Roll

2 - 6 mm

20 rolls/box

Joint sealing tape 0315/4-9

0315/4-9 Pre-compressed Joint sealing tape to DIN 18542 BG1 made from flexible polyurethane foam for sealing joints and connections in ETIC systems.

8 m Roll

4 - 9 mm

20 rolls/box

Joint sealing tape 0315/5-12

0315/5-12 Pre-compressed Joint sealing tape to DIN 18542 BG1 made from flexible polyurethane foam for sealing joints and connections in ETIC systems.

5,6 m Roll

5 - 12 mm

Joint sealing tape 0320/4-9

0320/4-9 Pre-compressed Joint sealing tape to DIN 18542 BG1 made from flexible polyurethane foam for sealing joints and connections in ETIC systems.

8 m Roll

4 - 9 mm

15 rolls/box

PVC-mesh corner bead 1017 S

1017 S (Langloch) PVC mesh corner bead to reinforce the edges of ETIC systems. Also suitable as edge reinforcement for the extensive repair of cracked plasters on façades in accordance with WTA data sheet 2-4 edition: 08.2014/D.

Dimensions 10 x 23 mm

50 pcs/box, 100 pcs/box

PVC-mesh corner bead 1019

1019 (Rundloch) PVC mesh corner bead to reinforce the edges of ETIC systems. Also suitable as edge reinforcement for the extensive repair of cracked plasters on façades in accordance with WTA data sheet 2-4 edition: 08.2014/D.

Dimensions 6 x 9 mm

100 pcs/box

PVC-mesh corner bead 1022

1022 PVC mesh corner bead to reinforce the edges of ETIC systems. Also suitable as edge reinforcement for the extensive repair of cracked plasters on façades in accordance with WTA data sheet 2-4 edition: 08.2014/D.

Dimensions 8 x 12 mm

8, 20, 40, 50, 100 pcs/box

PVC-mesh corner bead 1022 S

1022 S (Langloch) PVC mesh corner bead to reinforce the edges of ETIC systems. Also suitable as edge reinforcement for the extensive repair of cracked plasters on façades in accordance with WTA data sheet 2-4 edition: 08.2014/D.

Dimensions 8 x 12 mm

8, 20, 40, 50, 100 pcs/box

PVC-mesh corner bead 1023

1023 (Rundloch) PVC mesh corner bead to reinforce the edges of ETIC systems. Also suitable as edge reinforcement for the extensive repair of cracked plasters on façades in accordance with WTA data sheet 2-4 edition: 08.2014/D.

Dimensions 10 x 15 mm

8, 20, 40, 50, 100 pcs/box

PVC-mesh corner bead 1023 S

1023 S (Langloch) PVC mesh corner bead to reinforce the edges of ETIC systems. Also suitable as edge reinforcement for the extensive repair of cracked plasters on façades in accordance with WTA data sheet 2-4 edition: 08.2014/D.

Dimensions 10 x 15 mm

8, 20, 40, 50, 100 pcs/box

Reinforced mesh corner 1024

1024 Armoured corner for reinforcing inner and outer edges in ETIC systems. Particularly suitable for additional reinforcement of internal edges if fire barriers are required as a fire protection measure in ETIC systems with EPS.

Dimensions 10 x 15 mm

50 pcs/box

Reinforced mesh corner 1026

1026 Armoured corner for reinforcing inner and outer edges in ETIC systems. Particularly suitable for additional reinforcement of internal edges if fire barriers are required as a fire protection measure in ETIC systems with EPS.

Dimensions 10 x 15 mm

50 pcs/box

PVC-mesh corner bead 1027

1027 (Rundloch) PVC mesh corner bead to create edge reinforcement in ETIC systems. Also suitable as edge reinforcement for the extensive repair of cracked plasters on façades in accordance with WTA data sheet 2-4 edition: 08.2014/D.

Dimensions 10 x 40 mm

50 pcs/box

PVC-mesh corner bead 1028

1028 (Rundloch) PVC mesh corner bead to create edge reinforcement in ETIC systems. Also suitable as edge reinforcement for the extensive repair of cracked plasters on façades in accordance with WTA data sheet 2-4 edition: 08.2014/D.

Dimensions 10 x 30 mm

50 pcs/box

PVC-mesh corner bead 1028 S

1028 S (Langloch) PVC mesh corner bead to create edge reinforcement in ETIC systems. Also suitable as edge reinforcement for the extensive repair of cracked plasters on façades in accordance with WTA data sheet 2-4 edition: 08.2014/D.

Dimensions 10 x 30 mm

50 pcs/box

PVC-mesh corner bead with trigger edge 1029 / 1030

1029 / 1030 PVC mesh corner bead with rounded pull-off edge and plug connector for forming the edge reinforcement in ETIC systems. The rounded plaster-thickness pull-off edge enables a uniform plaster application in the edge area. Pull-off edge: 3 mm (1029), 8 mm (1030)

12,5 x 12,5 cm

25 pcs

PVC-mesh corner bead mit 3 mm trigger edge 1029 CODED

1029 cod. PVC mesh corner bead with rounded 3 mm pull-off edge and plug connector for forming the edge reinforcement in ETIC systems. The rounded plaster-thickness edge enables uniform plaster application in the edge area. The coded surface improves plaster adhesion. Pull-off edge: 3 mm

12,5 x 12,5 cm

25 pcs

PVC-Dripnose bead 1031 - A

1031 - A Dripnose bead profile with mesh on both sides incl. plug connector for horizontal formation of a visible drip edge.

Plaster thickness: 6mm

25 pcs

PVC-Dripnose bead 1031

1031 Dripnose bead with mesh on both sides incl. plug connector for horizontal formation of a visible drip edge.

Plaster thickness: 5 mm

25 pcs, 4 pcs

PVC-Dripnose bead 1032

1032 Dripnose bead with mesh on both sides for the horizontal formation of a concealed drip edge.

Plaster thickness: 4 mm

25 pcs

Expansion joint profile 1033 KOMBI

1033 KOMBI PVC expansion joint profile with flexible reinforced connecting flap and mesh on both sides for forming vertical expansion joints in ETIC systems. For vertical expansion joints in the façade surface and for internal façade corners.

Plaster thickness: 9 mm

25 pcs

Expansion joint profile 1034 KOMBI

1034 KOMBI PVC expansion joint profile with flexible fabric-reinforced connecting tab and mesh on both sides for forming vertical expansion joints in ETIC systems. For vertical expansion joints in the façade surface and for internal façade corners.

Plaster thickness: 3 mm

25 pcs

Expansion joint profile 1034

1034 PVC expansion joint profile with flexible fabric-reinforced connecting tab and mesh on both sides for forming vertical expansion joints in ETIC systems.

Plaster thickness: 3 mm

25 pcs

Reveal bead 1037

1037 One-piece reveal bead made of PVC, with foam tape (PE sealing tape), rigid tear-off flap and push-resistant or alkali-resistant mesh strip, for plaster thickness ≥ 15 mm.

Plaster thickness: 15 mm

30 pcs./box

PVC-movement joint profile 1041

1041 PVC movement joint profile with a co-extruded flexible TPE movement flap and mesh on both sides to form movement joints.

Plaster thickness: 6 mm

25 pcs

PVC-movement joint profile 1042

1042 PVC movement joint profile with a co-extruded flexible TPE movement flap and mesh on both sides to form movement joints.

Plaster thickness: 9 mm

25 pcs

Reveal bead 1046

1046 One-piece reveal bead made of PVC, with foam tape (PE sealing tape), with foam tape (PE sealing tape), rigid tear-off flap and push-resistant or alkali-resistant fabric stripFor plaster thickness ≥ 9 mm.

Plaster thickness: 9 mm

30 pcs./box

PVC-hanging profile 3 mm

1054 Supplement to the horizontal finish for insulation boards in ETIC systems with aluminium base profiles. The profile ensures a sufficient layer thickness of the reinforcement layer in the front edge area of the aluminium base profiles.

Plaster thickness: 3 mm

25 pcs

PVC-hanging profile 6 mm

1055 Supplement to the horizontal finish for insulation boards in ETIC systems with aluminium base profiles. The profile ensures a sufficient layer thickness of the reinforcement layer in the front edge area of the aluminium base profiles.

Plaster thickness: 6 mm

25 pcs

PVC sheet connection profile with mesh 1056

1056 PVC clip-on profile with variable clip-on edge including plug-in connector and integrated mesh strips with mesh overhang on one side as bottom connection of an ETIC system to existing sheet metal profiles

Plaster thickness: 8 mm

25 pcs

Reveal bead 1057

1057 One-piece reveal bead made of PVC, with foam tape (PE sealing tape), with foam tape (PE sealing tape), rigid tear-off flap-slide-resistant or alkali-resistant mesh strip and elastic protective lip made of soft PVC, for plaster thickness ≥ 9 mm.

Plaster thickness: 9 mm

30 pcs./box

Reveal bead 1060

1060 One-piece reveal bead made of PVC, with foam tape (PE sealing tape), with foam tape (PE sealing tape), rigid tear-off tab and push-resistant or alkali-resistant mesh strip for plaster thickness ≥ 6 mm.

Plaster thickness: 6 mm

30 pcs./box

Reveal bead 1066

1066 One-piece reveal bead made of PVC, with foam tape (PE sealing tape), with foam tape (PE sealing tape), rigid tear-off flap-slide-resistant or alkali-resistant mesh strip and elastic protective lip made of soft PVC, for plaster thickness ≥ 6 mm.

Plaster thickness: 6 mm

30 pcs./box

PVC starter track connector 1070

1070 Connecting element for aluminium Starter track profiles 2208 and 2210 to form a horizontal end in an alignment.

100 pcs

PVC spacer 1071

1071 For levelling substrate unevenness when installing ETIC Starter track profiles.

100 pcs

PVC spacer 1072

1072 For levelling substrate unevenness when installing ETIC Starter track profiles.

100 pcs

PVC spacer 1073

1073 For levelling substrate unevenness when installing ETIC Starter track profiles.

100 pcs

PVC spacer 1074

1074 For levelling substrate unevenness when installing ETIC Starter track profiles.

100 pcs

PVC spacer 1075

1075 For levelling substrate unevenness when installing ETIC Starter track profiles.

100 pcs

Reveal bead 1076

1076 Multi-part reveal bead made of PVC, with foam tape (PE sealing tape), with foam tape (PE sealing tape), rigid tear-off flap, alkali-resistant mesh strip and elastic protective lip made of soft PVC, plaster thickness ≥ 9 mm, *specifically for connection to inspection boxes of front-mounted roller shutters or to side parts of window sills*.

Plaster thickness: 9 mm

25 pcs./box

Mounting kit for alu starter track 1078

1078 For fastening aluminium Starter track profiles 2208 and 2210. 75 nail plugs 8 x 80 mm, 25 PVC Starter track connectors, 50 PVC spacers 3 mm, PU: 1 set per box

1 Set./box

Reveal bead 1084

1084 One-piece reveal bead made of PVC, with foam tape (PE sealing tape) and rigid tear-off tab, with foam tape (PE sealing tape) and rigid tear-off tab, for plaster thickness ≥ 15 mm.

Plaster thickness: 15 mm

30 pcs./box

Reveal bead 1087

1087 Multi-part reveal bead made of PVC, with foam tape (PE sealing tape), with foam tape (PE sealing tape), rigid tear-off tab, slide-resistant or alkali-resistant mesh strip and telescopic mechanism for greater movement absorption, for plaster thickness ≥ 9 mm.

Plaster thickness: 9 mm

25 pcs./box

Reveal bead 1089

1089 Multi-part reveal bead made of PVC, with foam tape (PE sealing tape), with foam tape (PE sealing tape), rigid tear-off flap, slip-resistant or alkali-resistant mesh strip and integrated PUR tape (compressed, protruding in the joint area) for greater movement absorption, for plaster thickness ≥ 7 mm.

Plaster thickness: 7 mm

30 pcs./box

PVC-Connecting piece 1090

1090 PVC rails for mechanical fastening (rail system) of ETICS polystyrene mounting insulation boards.

100 pcs/box

Aluminium-connecting piece 1092

1092 Aluminium rails for mechanical fastening (rail system) of ETICS mineral wool mounting insulation boards.

100 pcs/box

Arrow mesh 1094

1094 Arrow mesh for diagonal reinforcement in the corner area of building openings

PVC-Support rail 1095

1095 PVC rails for mechanical fastening (rail system) of ETICS polystyrene mounting insulation boards.

20 pcs/box

Aluminium-support rail 1096

1096 Aluminium rails for mechanical fastening (rail system) of ETICS mineral wool mounting insulation boards.

25 pcs/box

PVC-Start bar 1097

1097 PVC rails for mechanical fastening (rail system) of ETICS polystyrene mounting insulation boards.

20 pcs/box

Arrow mesh 1099

1099 Arrow mesh for diagonal reinforcement in the corner area of building openings

Nail Dowel 1696

1696 Special impact screws made of galvanised steel with plastic dowels for fastening ETICS starter track profiles.

6 x 60 mm

100 pcs

Nail Dowel 1698

1698 Special impact screws made of galvanised steel with plastic dowels for fastening ETICS starter track profiles.

8 x 80 mm

100 pcs

Hammer-in dowell 1720 (LTX 10)

1720 Hammer-in dowel with plastic nail (not pre-assembled) for fixing EPS insulation boards in ETIC systems.

200 pcs

Hammer-in dowell 1740 (LMX 8)

1740 Hammer-in dowel with plastic nail (not pre-assembled) for fixing EPS insulation boards in ETIC systems.

200 pcs

Hammer-in dowell 1760 (WKTHERM 8)

1760 Hammer-in dowel with plastic nail (not pre-assembled) for fixing EPS insulation boards in ETIC systems.

200 pcs (1760/95 - 1760/195) / 100 pcs (1760/215 - 1760/295)

Insulation holding discs 1790 (TDX 140 mm)

1790 Insulation retaining disc for fixing mineral wool lamella boards in ETIC systems in combination with products 1740, 1760 and 1820.

Width: 140 mm

200 pcs

Insulation holding discs 1791 (TDX 90 mm)

1791 Insulation retaining disc for fixing mineral wool lamella boards in ETIC systems in combination with products 1740, 1760 and 1820.

Width: 90 mm

6 x 100 pcs/box

Insulation holding discs 1792 (TDP)

1792 Insulation retaining disc for fixing EPS and mineral wool insulation boards to sheet steel and wooden substrates.

Width: 60 mm

6 x 100 pcs/box

EPS-Insulating disc cutter1795

1795 Styrofoam cutter for countersunk insulation dowel installation in combination with products 1720, 1740, 1760 and 1820

Width: 60 mm

1 pcs pro Bag

EPS-Rondell 1797

1797 Round discs for recessed insulation anchor installation in combination with products 1720, 1740, 1760 and 1820

Width: 60 mm

6 x 100 pcs/box

WDVS-Screw dowel1820 (WKTHERM-S8)

1820 Screw dowel with TX-40 steel screw (pre-assembled) for fixing insulation boards in ETIC systems.

200 pcs (1820/95 - 1820/195) / 100 pcs (1820/215 - 1820/295)

WDVS-Screw dowel 1840 (ECO-DRIVE 8)

1840 Screw dowel (pre-assembled) for recessed fixing of EPS insulation boards in ETIC systems.

100 pcs

Sink tool for ECO-DRIVE 1845

1845 Special countersinking tool to install the ETICS screw dowel 1840 (ECO-DRIVE 8)

Width: 90 mm

1 pcs/box

PVC-Mesh corner bead for arches 2015

2015 PVC fabmesh corner bead for forming the edge reinforcement in ETIC systems, especially for curved geometries.

10 x 15 cm

20 pcs

Lintel mesh 2028

2028 Lintel mesh for simultaneous internal corner and diagonal reinforcement in the corner area

PVC-Dripnose bead 2029

2029 Dripnose bead with mesh on both sides for horizontal formation of a visible drip edge.

Plaster thickness: 5 mm

4 pcs, 25 pcs

PVC-Dripnose bead 2030

2030 Dripnose bead with mesh on both sides for horizontal formation of a concealed drip edge.

Plaster thickness: 6 mm

4 pcs, 25 pcs

Expansion joint profile 2033

2033 PVC expansion joint profile with flexible fabric-reinforced connecting tab and mesh on both sides for forming vertical expansion joints in ETIC systems.

Expansion joint profile 2034

2034 PVC expansion joint profile with flexible fabric-reinforced connecting tab and mesh on both sides for forming vertical expansion joints in ETIC systems.

Plaster thickness: 3 mm

25 pcs

PVC-Starter track plug-in profile 60 mm

2035 Plinth insertion profile for creating a visible drip edge at the transition from the façade insulation to the plinth insulation or at transitions of different insulation thicknesses within the façades. Projection: 60 mm

25 pcs

Reveal bead 2036

2036 One-piece reveal bead made of PVC, with foam tape (PE sealing tape), non-slip or alkali-resistant mesh strip, *especially for connection under window sills to sheet metal panelling or wooden cladding*.

Plaster thickness: 3 mm

25 pcs./box

PVC-Starter track plug-in 60 mm

2037 Starter track plug-in profile to form a concealed drip edge at the transition from the façade insulation to the plinth insulation or at transitions of different insulation thicknesses within the façades. Projection: 60 mm

25 pcs

PVC-Base Starter track profile

2038 Horizontal termination, usually in the plinth area for insulation boards in ETIC systems in combination with the PVC plinth insert profile 2039. Thermal bridge losses are minimised due to the thermal decoupling from the wall. Projection: 55 / 100 / 160 mm

25 pcs

PVC-Starter track plug-in100 mm

2039 Starter track plug-in to form a concealed drip edge at the transition from the façade insulation to the plinth insulation or at transitions of different insulation thicknesses within the façades. In conjunction with the PVC base starter track profiles 2038/200/55 - 160, finished lower ends can be created up to an insulation thickness of 240 mm. Projection: 100 mm

25 pcs

Reveal bead 2047

2047 One-piece reveal bead made of PVC, with foam tape (PE sealing tape), rigid tear-off flap and push-resistant or alkali-resistant mesh strip for plaster thickness ≥ 9 mm.

Plaster thickness: 9 mm

30 pcs./box

PVC- plaster stop bead 2050

2050 PVC stop bead with trigger edge and mesh strip for separating plaster coatings.

Plaster thickness: 3 mm

25 pcs

PVC- plaster stop bead 2051

2051 PVC stop bead with trigger edge and mesh strip for separating plaster coatings.

Plaster thickness: 6 mm

25 pcs

PVC- plaster stop bead 2052

2052 PVC stop bead with trigger edge and mesh strip for separating plaster coatings.

Plaster thickness: 10 mm

25 pcs

PVC- plaster stop bead 2053

2053 PVC- stop bead with trigger edge and mesh strip for separating plaster coatings.

Plaster thickness: 15 mm

25 pcs

PVC- plaster stop bead 2054

2054 PVC stop bead with drip edge for use in thermal insulation composite systems as a horizontal

Reveal bead 2055

2055 Multi-part reveal bead made of PVC, with foam tape (PE sealing tape), rigid tear-off tab, anti-slip or alkali-resistant mesh strip, plaster thickness ≥ 9 mm, *specifically for lateral connection to roller shutter guide rails*.

Plaster thickness: 9 mm

25 pcs./box

Reveal bead 2056

2056 Multi-part reveal bead made of PVC, with foam tape (PE sealing tape), rigid tear-off tab, push-resistant or alkali-resistant mesh strip, elastic protective lip made of soft PVC and telescopic mechanism for greater movement absorption, for plaster thickness ≥ 9 mm.

Plaster thickness: 9 mm

25 pcs./box

PVC-Mesh corner bead with trigger edge 2063 / 2064 / 2065

2063 / 2064 / 2065 PVC mesh corner bead with trigger edge for forming the edge reinforcement in ETIC systems. The pull-off edge in plaster thickness enables a uniform plaster application in the edge area. Pull-off edge: 3 mm (2063), 6 mm (2064), 10 mm (2065)

10 x 15 cm

25 pcs (2063, 2064), 15 pcs (2065)

PVC-Mesh corner bead 2066

2066 PVC mesh corner bead 10 x 15 cm with trigger edge 15 mm

10 x 15 cm

20 pcs

WDVS-Montagequader GD 2069

2069 Mounting element for fixing flush-mounted boxes (double) in ETIC systems. Suitable for all standard flush-mounted boxes with a diameter of 64 mm.

12 x 16 x 100 cm

1 pcs/box

WDVS-Montagequader Universal 2070

2070 Mounting element for the professional fastening of handrails, lighting systems, window shutters and pipe clips in ETIC systems. Also suitable as a pressure pad for medium-heavy loads.

12 x 16 x 100 cm

1 pcs/box

PVC-Mesh corner bead flexibel 2080 / 2081

2080 / 2081 PVC mesh corner bead to form the edge reinforcement in ETIC systems. Thanks to the flexibility of the profile, edges with angles smaller and larger than 90° can also be created.

8 x 12 cm (2080), 10 x 15 cm (2081)

50 pcs

PVC-Dripnose bead 2106

2106 Dripnose bead with mesh on one side for horizontal formation of a visible drip edge.

Plaster thickness: 4 mm

40 pcs

PVC-Dripnose bead 2107

2107 Dripnose bead with mesh on one side and foam tape (PE sealing tape) for horizontal formation of a visible drip edge.

Plaster thickness: 4 mm

40 pcs

PVC-Starter track Vario 1

2113 Two-part PVC starter track profiles for mounting insulation boards in ETIC systems, mounting bracket 200 cm, drip edge profile 205 cm, projection 100 - 140 mm

: 100-140 mm

10 pcs

PVC-Starter track Vario 2

2114 Two-part PVC starter track profiles for mounting insulation boards in ETIC systems, mounting bracket 200 cm, drip edge profile 205 cm, projection 140 - 180 mm

: 140 - 180 mm

10 pcs

PVC-Starter track Vario 3

2115 Two-part PVC starter track profiles for mounting insulation boards in ETIC systems, mounting bracket 200 cm, drip edge profile 205 cm, projection 180 - 220 mm

: 180 - 200 mm

10 pcs

Reveal bead 2151

2151 One-piece reveal bead made of PVC, with foam tape (PE sealing tape), rigid tear-off flap, slip-resistant or alkali-resistant mesh strip and with elastic movement element made of soft PVC

Plaster thickness: 9 mm

40 pcs./box

Reveal bead 2180 Membrano

2180 Multi-part reveal bead made of PVC, with foam tape (PE sealing tape), rigid tear-off tab, slip-resistant or alkali-resistant mesh strip, shadow gap and elastic loop made of soft PVC for greater movement absorption, for plaster thickness ≥ 10 mm.

Plaster thickness: 10 mm

30 pcs./box

Reveal bead 2180 Membrano Anthracite

2180A Multi-part reveal bead made of PVC, with foam tape (PE sealing tape), rigid tear-off tab, slip-resistant or alkali-resistant mesh strip, shadow gap and elastic loop made of soft PVC for greater movement absorption, anthracite colour, for plaster thickness ≥ 10 mm.

Plaster thickness: 10 mm

30 pcs./box

PVC-click-on profile with mesh 3 mm

2190 Supplement to the horizontal finish for insulation boards in ETIC systems with aluminium starter track profiles. The profile ensures a sufficient layer thickness of the reinforcement layer in the front edge area of the aluminium starter track profiles.

20 pcs

PVC-click-on profile with mesh 6 mm

2191 Extension to the horizontal finish for insulation boards in ETIC systems with aluminium starter track profiles. The profile ensures a sufficient layer thickness of the reinforcement layer in the front edge area of the aluminium starter track profiles. Pull-off edge: 6 mm

20 pcs

PVC-click-on profile with mesh 10 mm

2192 Extension to the horizontal finish for insulation boards in ETIC systems with aluminium starter track profiles. The profile ensures a sufficient layer thickness of the reinforcement layer in the front edge area of the aluminium starter track profiles. Deduction edge: 10 mm

20 pcs

PVC-click-on profile with mesh 15 mm

2193 Supplement to the horizontal finish for insulation boards in ETIC systems with aluminium starter track profiles. The profile ensures a sufficient layer thickness of the reinforcement layer in the front edge area of the aluminium starter track profiles.

20 pcs

Aluminium-Starter track 2208

2208 Horizontal finishing, usually in the plinth area, for insulation boards in ETIC systems. Material thickness: 0.8 mm

Projection: 30 - 200 mm

10 / 4 pcs

Aluminium-Starter track 2210

2210 Horizontal finishing, usually in the plinth area, for insulation boards in ETIC systems. Material thickness: 1.00

Projection: 40 - 200 mm

10 / 4 pcs